Rodgers Instruments W-5000 Podręcznik Użytkownika Pobierz pdf (Strona 15)

Introduction & Installation

1 MIXED LINE

These XLR connectors allow you to connect your W-5000 to a mixing console BALANCED

INPUT (using long cables if necessary). The signal from these connectors is a Line level mix

of the individual outputs (SYNTH, DRAWBAR and CLASSIC).

2 RODGERS

This is the standard Rodgers connector for the main individual outputs MAIN

OUTPUT(SYNTH, DRAWBAR and CLASSIC) and the MIXED LINE or SPKR OUTPUT.

It also sends a 'power on' signal to any connected amplifier(s).

3 AUX INPUT

These XLR inputs accept connection of microphones, external keyboards etc. Sensitivity and

other controls are accessible through the [AUDIO] button in the FUNCTIONS section.

4 RODGERS

This is the standard Rodgers connector for MIXED LINE Output. It also sends a

ANTIPHONAL OUTPUT 'power-on' signal to any connected amplifier(s).

5 AUX INPUT

These 1/4" inputs accept connection of microphones, sound modules, external keyboards etc.

Sensitivity and other controls are accessible through the [AUDIO] button in the

FUNCTIONS section.

6 SYNTH

OUTPUT

These 1/4" jacks provide an individual, line-level output for sounds from the Synth tone

generator. For the best results, use both jacks.

7 DRAWBAR

OUTPUT

These 1/4" jacks provide an individual, line-level output for sounds from the Tone-Wheel

generator. For the best results, especially when the Rotary simulator is active, use both jacks.

8 CLASSIC

OUTPUT

These 1/4" jacks provide an individual, line-level output for sounds from the Classic Organ

tone generator. For the best results, use both jacks.

9 MIXED SPKR

These 1/4" jacks provide a line-level output for the same signals going to the OUTPUT

internal amplifier and speakers (the Speaker mix).

10 MIXED LINE

These 1/4" jacks provide an option for connection to a mixing console (an OUTPUT optional

Line mix output).

11 MIDI 1

These MIDI ports allow you to connect your W-5000 to external MIDI devices (such as

sound modules, sequencers etc.). Control of these ports is accessed through the [MIDI]

buttons found in each section (UPPER/LOWER/BASS) and the [MIDI] button in the

FUNCTIONS section.

12 MIDI 2

Same as MIDI Port 1 without the THRU connector.

13 SW1

This 1/4" jack accepts connection of an external, switched (on/off) controller. The function

of this controller is user defined.

14 PEDAL

This 1/4" jack accepts connection of an external controller (such as an Expression pedal).

The function of such a controller is user defined.

15 ACC POWER

This is a general purpose 12v DC power outlet. It can be used to power an external piece of

equipment (like a Rodgers PR-300, for example).

16 ROTARY TONE

CABINET

This multi-pin connector is used to connect a rotary tone cabinet to your W-5000.

17 SPEAKER/

EXPRESSION

PEDAL

This multi-pin connector is used to connect the on-board speakers and Expression pedal

(both integrated into the stand) to the keyboard.

18 MAIN POWER

Connect the included AC power cord to this inlet.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 164 165

Komentarze do niniejszej Instrukcji

Brak uwag

Rodgers Instruments W-5000 Podręcznik Użytkownika Strona 15

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Instrumenty muzyczne Rodgers Instruments W-5000